Irwin EA0030 Power Signal Generator
The new Irwin EA0030 Power Signal Generator comes with an output frequency from 0.1Hz to 100 KHz available through 6 switched ranges. Switchable outputs of Sine, Square, Triangle and Pulse. The output frequency ranges from 0.1Hz to 100kHz and is adjusted using both the six-position ‘Range Hz’ switch and the multi-turn rotary ‘Frequency’ control. The actual output frequency is continuously monitored and shown on the blue LED Display.
The output amplitude of the waveform ranges from zero to a maximum of 10V
peak to peak using the rotary ‘Gain’ control.
It can also be used as a stand-alone Amplifier with a Voltage Gain (Av) ranging from zero to 100 (+40dB) via the rotary ‘Gain’ control and a frequency response of 1Hz to 100kHz (-3dB bandwidth). Note: the Amplifier has an input impedance of 1MW and a maximum input voltage of 200mV peak to peak (irrespective of the Gain setting).
- Input Voltage 230V 50Hz
- Output 4W into 8 ohms
Manufactured in the UK